［ TCMX-600 ］
Multi-head embroidery machines, specialized for chenille embroidery, in the pursuit of high speed, quietness and productivity. Stable stitching is available at the industry's fastest speed of 750rpm in lineup up to 23 heads!
［ TCMX-601 ］
Single-head model, using the same technologies as the multi-head models. Space-saving and best suited for small lot production!

［TCMX-600］

［TCMX-601］

High-speed operation at 750 rpm has been brought to reality.

High-speed operation at750 rpm (in comparison with our previous specification of 600 rpm) has drastically increased productivity.

Automatic change of 6 colors enables versatile multicolor arrangement.

A setting on the operation panel allows the operator to select desired colors.

Automatic lift-up mechanism

The Needle, Nipple and Presser foot are automatically lifted up for easier frame exchange operation.

Automatic needle height adjusting mechanism

Needle height is adjustable in 10 steps according to the loop height or chain size.

Tie-off function to prevent the thread from fraying

Chain stitches are automatically inserted for some stitches after completion of loop stitches for prevention of thread fraying that causes production error.

Scale up/down, Rotate

You can scale your designs down to 50% or up to 200% in increments of 1%, and rotate in 1-degree increments.

Automatic Repeat

A design can be automatically repeated up to 99 times both vertically and horizontally. The repetition can be set for continuous operation.

Design Editing

Modify, insert or delete your embroidery design data stitch by stitch.

Satin Stitch Reduction and Expansion

Increase or decrease actual stitch length according to the stitch length in a design.

Frame Back / Forward

Frame Back / Forward is available in units of stitches, color change or designated stitch count.

Origin Return

The frame can be either manually or automatically returned to the design starting point (while the machine is stopped), even if the end point is different from the starting point.

Automatic Offset / Manual Offset

Facilitates applique fabric placement and frame changing.

Automatic Upper / Under Tread Trimming Device <ATH>

Automatically operates by commands in the design data.

Power Failure Control Measures

You can continue to operate the machine after power failure during embroidery without being annoyed by misproduction due to design displacement.

• Coiling/Taping Device（MT-1）

This device enables both coiling embroidery and taping embroidery. Coiling embroidery finishes core and coiling threads with a soft touch and allows you various coiling variations. (The winding ratio of coiling thread for the core thread si adjustable in 4 steps.) Futhermore, combination with loop and/or chain stiches expands the potentials of you embroidery designs.

• Cording Device [K-2]

The cording device, exclusively used for chenille embroidery.

• Jog Remote-Controller <PAT>

The jog remote-controller has consolidated the function of frame travel operations. It is independent of the operation panel and allows to move the frame while the operator is close to the needles.