2014/08/22

TFSN series

912/915/920

TFSN series
TFSN series

Invested with all the latest technology, the TFSN Series has brought both the high quality and cost reduction to reality.

Technology

TFSN series Spiral tube Take-up lever guard <PAT> Middle thread guide Thread breakage detecting system Rotary Hook <PAT> Operation panel

Function

User-Friendly, Quieter Operation
Memory

Latest noise reduction developments help create a quiet and pleasant working environment for operators.

Standard memory capacity : 2,000,000 stitches to register Max.99 designs.

Condition Memory <PAT>
Scale Up / Down, Rotate

Stitching conditions (design start position, color sequence etc.) can be output to a floppy disk along with the design data. The saved stitch conditions are applicable to reproduction as they reduce setting time.

You can scale your designs down to 50% or up to 200% in increments of 1%, and rotate in 1-degree increments.

Automatic Repeat
Design Editing

A design can be automatically repeated up to 99 times both vertically and horizontally. The repetition can be set for continuous operation.

Modify, insert or delete your embroidery design data stitch by stitch.

Satin Stitch Length Compensation
Cleanup function

The embroidery finish of satin of stitches may sometimes differ in values, compared with original design data, depending on the embroidery conditions like very stretchy fabrics. Satin stitch length can be increased or decreased for compensation with ease on the operation panel.

A simple setting on the operation panel removes unnecessary fine stitches (0.5mm long or less) contained in the design data. Removal of these fine stitches will decrease thread breakage that leads to decreased production due to machine downtime.

Frame Back / Forward
Production management function

Frame Back / Forward is available in units of stitches, color change or designated stitch count.

Production management information like stitch counts of memorized designs, time required for embroidery process, remaining stitches up to preset halt (preliminarily set stop position) can be checked on the operation panel. This will help you get a better grasp of production efficiency.

Embroidery space trace function
Origin Return

This function moves only the frame on the contour of an embroidery design and helps you check if a design will fit in a designed embroidery space before sewing it. This will prevent needles from hitting the frame by mistake during the embroidery operation.

The frame can be either manually or automatically returned to the design starting point (while the machine is stopped), even if the end point is different from the starting point.

Automatic Offset / Manual Offset
Marking

Facilitates applique fabric placement and frame changing.

Design starting point can be easily positioned for placement of embroidery.

Automatic Upper / Under Tread Trimming Device <ATH>
Power Failure Control Measures

Automatically operates by commands in the design data.

Even if the power supply is cut off in the middle of embroidery due to power failure or other reasons, the embroidery position is saves in memory so the machine can resume with a simple operation after the machine is reset. The embroidery process can be resumed in the position just before the power failure to save product loss.

Specification

TFSN Series

Models Heads Head Interval Needles Embroidery space (Per head / All heads)
9 D x W Continuous design
TFSN- 12 360 o 680 x 360 4,320
TFSN- 15 400 o 680 x 400 6,000
TFSN- 20 330 o 680 x 330 6,600

[Example of model code]
TFSN- (a), 9 (b), 20 (c) Contents of model code : a=model name, b=number of needles, c=number of heads

- Stitch length…
Ternary scale : 0.1-12.1mm
Binary scale : 0.1-12.7mm
- Speed…Max. 1,000rpm
- Motor…Motor x 1
Pulse Motor x 2

- Electricity…
3-phase : 200/220/380/415V 50Hz60Hz
- Power consumption…1.3kw

ホームへ先頭へ前へ戻る