2014/08/22

TCMX series (Mixed type)

61200/60900/60600

TCMX series (Mixed type)
TCMX series (Mixed type)

A Mixed type series to increase production efficiency and open the way to versatile embroidery expressions! Chenille embroidery and standard embroidery have been brought together in one embroidery machine. A chenille embroidery head is coupled with a standard embroidery head in a pair (available up to 15 pairs).

Technology

TCMX series (Mixed type) Table offset switch <PAT.P> Spiral tube Take-up lever guard <PAT> Middle thread guide Thread breakage detecting system Chenille embroidery head Rotary Hook <PAT> Ball screw drive system Operation panel

Function

High-speed operation at 750 rpm has been brought to reality.
Automatic change of 6 colors enables versatile multicolor arrangement.

High-speed operation at750 rpm (in comparison with our previous specification of 600 rpm) has drastically increased productivity.

A setting on the operation panel allows the operator to select desired colors.

Automatic lift-up mechanism
Automatic needle height adjusting mechanism

The Needle, Nipple and Presser foot are automatically lifted up for easier frame exchange operation.

Needle height is adjustable in 10 steps according to the loop height or chain size.

Tie-off function to prevent the thread from fraying
Scale up/down, Rotate

Chain stitches are automatically inserted for some stitches after completion of loop stitches for prevention of thread fraying that causes production error.

You can scale your designs down to 50% or up to 200% in increments of 1%, and rotate in 1-degree increments.

Automatic Repeat
Design Editing

A design can be automatically repeated up to 99 times both vertically and horizontally. The repetition can be set for continuous operation.

Modify, insert or delete your embroidery design data stitch by stitch.

Satin Stitch Reduction and Expansion
Frame Back / Forward

Increase or decrease actual stitch length according to the stitch length in a design.

Frame Back / Forward is available in units of stitches, color change or designated stitch count.

Origin Return
Automatic Offset / Manual Offset

The frame can be either manually or automatically returned to the design starting point (while the machine is stopped), even if the end point is different from the starting point.

Facilitates applique fabric placement and frame changing.

Automatic Upper / Under Tread Trimming Device <ATH>
Power Failure Control Measures

Automatically operates by commands in the design data.

You can continue to operate the machine after power failure during embroidery without being annoyed by misproduction due to design displacement.

Specification

Models Needles
(Chenille/Standard)
Paired
heads
Chenille
heads
Standard
heads
Head Interval Embroidery space
D x W
TCMX-60912 6/9 12 12 12 510 680 x 510 (230)
TCMX-60912 6/9 12 12 12 510 1200 x 510 (230)
TCMX-60915 6/9 15 15 15 480 1,000 x 480 (230)

[Example of model code]
TCMX-(a),6 (b) 09 (c), 15 (d) Contents of model code : a=model name, b=Number of needles (Chenille heads), c=Number of needles (Standard heads), d=Paired heads
 

- Stitch length…
Ternary : 0.1-12.1mm
Binary : 0.1-12.7mm
- Speed…
Standard Embroidery : Max.1,000rpm
Chenille Embroidery : Max.750rpm
- Motor…
AC Servo Motor x 1
Pulse Motor x 2

- Electricity…
3-phase : 200~240V 350~440V 50Hz/60Hz is also available with an optional transfomer.
- Power consumption…1.6kw

Factory Option For Standard Embroidery Heads

Jumbo Rotary Hook

Sequin Device IV

Jumbo Rotary Hook
Jumbo Rotary Hook

The special jumbo size rotary hooks and stitching mechanism of our own design have enabled various thickness of upper threads from thin to thick to be used readily.
Due to expanded bobbin capacity (twice as much as the small hook), bobbin changing tasks have been drastically decreased, increasing productivity.

Sequin Device IV
Sequin Device IV

Wide range of sequins from small to large sizes or in various shapes like noncircular or eccentric type are applicable for creation of you designs as needed, depending on your applications.

more detail

Sequin Device III Twin Type <PAT>

Position Marker

Sequin Device III Twin Type <PAT>
Sequin Device III Twin Type <PAT>

It is now possible to embroider a max. of 4 different sizes, shapes and colors on each head. 2 kinds of sequins on one side can be interchanged and embroidered at high speeds as desired. This next-generation Sequin device permits more design options and improves production efficiency. Installable in a compact design even to the machines with small head intervals.

more detail

Position Marker
Position Marker

Points out a needle hole position, hidden on a cloth, by light it up with a LED beam to align embroidery start position. You can check the needed position anytime.

*The red point is a LED beam.

Factory Options For Chenille Embroidery Heads

Coiling/Taping Device(MT-1)

Cording Device [K-2]

Coiling/Taping Device(MT-1)
Coiling/Taping Device(MT-1)

This device enables both coiling embroidery and taping embroidery. Coiling embroidery finishes core and coiling threads with a soft touch and allows you various coiling variations. (The winding ratio of coiling thread for the core thread si adjustable in 4 steps.) Futhermore, combination with loop and/or chain stiches expands the potentials of you embroidery designs.

Cording Device [K-2]
Cording Device [K-2]

The cording device, exclusively used for chenille embroidery.

Taping Device (KT-1)

Options

Jog Remote-Controller <PAT>

 
Jog Remote-Controller <PAT>
Jog Remote-Controller <PAT>
Jog Remote-Controller <PAT>
Jog Remote-Controller <PAT>

The jog remote-controller has consolidated the function of frame travel operations. It is independent of the operation panel and allows to move the frame while the operator is close to the needles.

Factory Option For Standard Embroidery Heads

High-Speed Cording Device
(KB-2M)

Boring Device II

High-Speed Cording Device (KB-2M)
High-Speed Cording Device (KB-2M)

New variations of looping or cording embroidery can be added to a design by switching between 2 kinds of attachments.

Boring Device
Boring Device

A special knife bores a hole in a fabric and then a needle and thread sew open the hole. The size of the hole is adjustable and the shape can be created through the process of digitizing to meet your desires. This device is applicable to all normal embroidery heads and easily increases the value of embroidered products.

Emb. Lame Attachment

 
Emb. Lame Attachment
Emb. Lame Attachment

Lame filament yarn can be stitched steadily without being twisted to create your original embroidery.

ホームへ先頭へ前へ戻る