TMAR-KC TYPE-2 series
The embroidery machine that brings beauty to life.
Giving you the highest-quality embroidery machine with all of Tajima's technologies,the only way to realize the utmost in embroidery quality.
- TMAR-KC TYPE-2 SERIES
Exquisite embroidery even on thick fabric and leather
- Equipped with the digitally-controlled presser foot DCP
By digitally controlling fabric pressing,the DCP can be set to the thickness of the fabric so as not to over press the material causing shadows or damage.
Also, by optimizing the timing of fabric pressing, the DCP can suppress the "fluttering" of the embroidery material, beautifully finishing precision embroidery.
The DCP is very effective for hard-to-embroider materials like leather,thick fabric,stretchy fabric and quilting.
- Judo belt
- Embroidery with the extra-fine thread (Actual dimensions)
Example: Thick leather sewing and "fluttering"
Preserving the embroidered by hand texture or lace embroidery
- Equipped with the FS mode (NEW)
The FS mode,which has made the TFGN II Series so sought-after,can optimally tune the embroidery machine,and thereby reduce the burden on the yarn and improve the stability and quality of embroidery. Furthermore, by using parts specially designed for the FS mode (option), even difficult-to-embroider soft twist thread and thick thread can be embroidered.
- Preserving the embroidered by hand texture or lace embroidery- Equipped with the FS mode (NEW)
＊The FS mode is applicable only to the tubular frame and the border frame.
Improvement of the work efficiency
- Direct command switch (NEW)
Various operation switches and multi-color LEDs are located on the each head. Since all of the main functions of the operation panel can be manipulated from each head, the working efficiency of operators has been improved.
Commonly used functions may be assigned to the custom switches. (Scheduled for 2016)
- Improvement of the work efficiency- Direct command switch (NEW)
Major boost of cap embroidery turnout (NEW)
The newly-designed Slim Cylinder Bed, which has a downsized diameter compared to the conventional cylinders by about 12%, has widened the range of application so as to cover tubular products, such as sleeves and pockets.
The Wide Cap Frame also has been newly designed to upgrade the rigidity coinciding with the Slim Cylinder Bed. This frame has enhanced the embroidery stability whereby incresing the rotational speed to 1000 rpm.
(900 rpm for +4mm)
- Reinforced Wide Cap Frame
- Snap-fit type middle hread guide
Easy threading/Easy adjustment/Easy exchange
- Reinforced Border Frame
- Touch Screen Operation Panel
|Embroidery Space per Head
Depth x Width mm
: Inside Dimension
3-phase : 200V
Single phase : 100V,200V
- Power consumption...
* The practical embroidery space and the rotational speed vary depending on embroidery product, machine model, and operating conditions.
* No registered trademark or design of the products contained in this catalog may be used without prior permission.
Sequin Device III Twin Type <PAT>
Sequin Device IV
- Sequin Device III
Embroidering 2 different sequins by freely switching them at high speed
- Sequin Device IV
Embroidering various sequins: small-diameter sequins, large-diameter sequins, irregular-shaped sequins and eccentric sequins
Multi Cording Device
Embroidering 6 various types/colors of cords