Groundbreaking designs emerging
from our exploration of new technologies
PERFORATION, MULTICOLOR
SEWING & EMBROIDERY
FEATURES
Precision and usability,
fully incorporating Tajima's
embroidery technologies
High-precision and Stable Finish
Due to the structure supporting the frame in the back(A) on the right side(B),
frame movement is stable and provides high-precision hole making, sewing and
embroidery.
The machine incorporates many of our main functions achieved through our many
years of experience for color change, sewing finish and thread trimming.
Wide work area
For the electric pattern sewing machine head, the "Bridge Type" is adopted
instead of the space-constraining "Arm Type," so that a wider work area(C) can
be achieved as compared to a common sewing machine.
It allows a wider application of embroidery to such larger items like car seats and
furniture.
Your creativity instantly reproduced in design data
Tajima's exclusive digitizing software "DG-S" helps to create designs without
restricting the designers' creativity.
The created designs can be easily
edited, reducing mistakes caused by trial and error. Illustrator and/or CAD data
can be converted to perforating data and/or sewing data.
*DG16 is required for creation of embroidery data.
Tajima's original "digitally controlled presser foot [DCP]"
When real leather and urethane are sewn together during machine quilting, the presser foot may be set at a low level so that the elastic urethane can be held down securely while still maintaining its volume.This prevents the thread from loosening and creates a voluminous finish.
Supported for the rounded rectangle perforator needle
The exclusive use of angle gauges ensure that the rounded rectangle perforator needle can be mounted at the correct angle.
By mounting one on several needle bars at different angles, the variety of designs can be expanded, such as motifs featuring rotation.
MULTICOLOR SEWING & EMBROIDERY
PERFORATION
OPTIONS
PAX / HAR / PAR
-
DG-S
Software for embroidery data creation that can read vector files (Adobe Illustrator, Corel draw) and/or CAD data.
-
Gauge Frame
A frame for holding the material on the table.
-
Bar Code Reader
A function that checks the design data against the actual fabric to prevent human errors.
PAX / HAR
-
Auto Bobbin Checker(ABC)
A device that detects the remaining amount of under thread to prevent the occurrence of errors caused by unexpected thread run out.
-
UBCⅡ (4-pole spec)
A mechanism preloaded with 3 spare bobbins and exchanges bobbins for all the heads at once in as fast as 16 seconds.
Drastically reduces downtime for bobbin exchange. -
Exclusive Presser Foot for Sewing Heads
The presser foot can be selected from 3 types according to the material type and the sewing method.
-
Thread Loosening Device
A device that reduces errors at the start of embroidery by loosening the tension on the upper thread during thread cut and stabilizing the cut surface.
PAX / HAR
-
Auto PP Tape Feeder
A mechanism that automatically feeds the PP tape for catching the perforator with the minimum waste, contributing to cost effectiveness.
-
Auto Double PP Tape Feeder
A two-reel version of the auto PP tape feeder that feeds dual tapes for consistent perforation.
-
Vacuum Device
Used to collect dust if there is no air control system in the building.
-
Perforator Needle
There are 4 types of perforator needles available (dia. 0.8mm, 1.0mm, 1.5mm and 2.0mm).
-
Synchronized Vacuum System
Air suction route is automatically optimized in accordance with the needle bar movement.
*For more details, please contact our distributor(s).
SPEC
Models | P-head:Perforation | H-head:Sewing, Embroidery | Heads | Needles | Work Area[DxW] mm (inch) | |
---|---|---|---|---|---|---|
PAX | PAX-V0901F | ● | ● | 1 | 9 | 550x550S/240 (21.6x19.6/9.5) |
PAX-V0901F | ● | ● | 1 | 9 | 750x800S/240 (29.5x31.4/9.5) |
|
PAX-V0901F | ● | ● | 1 | 9 | 1000x1200S/240 (39.3x47.2/9.5) |
|
HAR | HAR-V0901F | ● | 1 | 9 | 750x800S (29.5x31.4) |
|
HAR-V0901F | ● | 1 | 9 | 1000x1200S (39.3x47.2) |
||
HAR-V0902F | ● | 2 | 9 | 750x800S (29.5x31.4) |
||
HAR-V0902F | ● | 2 | 9 | 1000x1200S (39.3x47.2) |
||
PAR | PAR-V0901F | ● | 1 | 9 | 750x800S (29.5x31.4) |
|
PAR-V0902F | ● | 2 | 9 | 750x800S (29.5x31.4) |
||
PAR-V0902F | ● | 2 | 9 | 1000x1200S (39.3x47.2) |