Product details
Tajima TMBU-SC series is an embroidery machine that supports not only regular embroidery such as caps and shirts, but also large products such as golf bags and travel carry bags. Raising/lowering table to support heavy objects, Digitally Controlled Presser
Foot “DCP”, and laser crosshair marker that accurately illuminates the embroidery position are standard equipment, and an easy-to-use magnetic frame “M frame” can also be selected as an option.
Incorporation of the Digitally Controlled Presser Foot for secure fabric stability.
The DCP can reduce fabric fluttering that occurs during embroidery.
It is especially effective when working thick fabric, very thin fabric, and folds of material.
What is“ fluttering”?
“Fluttering” occurs when the material is lifted up during embroidery which causes skipped stitches, miss-trimming, and reduced quality stitching.
The DCP can be adjusted randomly according to the material thickness on the operation panel. It simplifies the mechanical process that was previously required and time consuming.
※DCP stands for Digitally Controlled Presser foot.
Laser Crosshair Marker
When executing Trace function to check the position of the product, the laser crosshair marker irradiates the product in a cross shape from directly above, so that the accurate position can be confirmed even for thick material.
M-Frame
Because the embroidery is sandwiched between magnets, it is an excellent frame that does not leave traces on the product. It is easy to use and you can select the embroidery position on the product.
Hydraulic step pump for raising/lowering Table
The table can be raised or lowered by stepping to the height of a large product. In addition, it can also be used as a workbench for framing Tubular frames and Cap Frames.
Advanced settings according to the embroidery
With Digitally Controlled Presser Foot “DCP”, the height of the presser foot can be adjusted on the operation panel according to the thickness of the fabric. the height of the presser foot can be set on embroidery design data using Tajima DG by Pulse which is recommended by Tajima. DCP is effective for leather that is difficult to embroider, delicate silk, quilted fabric, and 3D foam.
Specifications
| Model | Needles | Embroidery space （D×W） |
Table size D×Wmm |
||||||
|---|---|---|---|---|---|---|---|---|---|
| Border Frame |
Wide Cap Frame | Cap Frame | Tubular Frame | Pocket Frame | |||||
| TMBU-SC | 8 | 14 | 360×500 | 75×360 | 83×180 | 360×500 | 65×100 | 100×75 | 955×870 |
| Needles | 8,14 |
| Revolution | Max.1,200rpm |
| Weight | 140kg |
| Size | Full length：870mm, Depth：955mm, Height：1675mm |
| Power consumption | 160W |
| Power supply | Single-phase 100-120V,200-240V 50Hz/60Hz |
Factory Option
Device for embroidering small to large diameter, irregular or eccentric sequins
Brightly illuminates the needles and improves workability
A safety device that stops sewing when approaching the embroidery head in consideration of operator safety
Option
Device for sewing up to 6 colors of cord material
Various expressions are possible by combining with embroidery
Possible to stably sew filament-like lame thread without twisting
Embroidery Frame Option
（360mm×500mm）
For T-shirts, sweatshirts or uniforms
（75mm×360mm）
For caps
（360mm×500mm）
Support normal embroideries such as emblems and put-on sewing
（50mm×30mm）
For socks, wristbands
（100mm×75mm,
65mm×100mm）
For small embroidery such as pockets
For pouches, tote bags
